SN74LVC374ARGYRG4

SN74LVC374ARGYRG4 Overview

In the form of VQFN, it has been packaged. Package Tape & Reel (TR)embeds it. 20terminations have occurred. Power is supplied from a voltage of 1.8V volts. It is a member of the LVC/LCX/Zfamily of D flip flop. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 20 pins. There is a clock edge trigger type of Positive Edgeon this device. It is part of the FF/Latchesbase part number family. An electronic part with 8bits has been designed. Its flexibility is enhanced by 8 circuits. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The D flip flop is embedded with 2ports. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. As of now, there are 1input lines. A -24mAis set for the high level output current. It is set to 24mAfor low level output current. A temperature below 85°Cshould be used for operation. Ideally, the operating temperature should be higher than -40°C. A minimum supply voltage of 1.65V is required for these RS flip flops to operate. It is capable of supporting a maximum supply voltage of 3.6V. It is possible to achieve a frequency of 100MHz. This logic IC is BUS DRIVER. It has 1 functions. It is equipped with 20 pin count. Its output current of 24mA allows for maximum design flexibility.

SN74LVC374ARGYRG4 Features

Tape & Reel (TR) package
20 pins
8 Bits
1 Functions
20 pin count

SN74LVC374ARGYRG4 Applications

There are a lot of Texas Instruments SN74LVC374ARGYRG4 Flip Flops applications.

• Frequency Dividers
• QML qualified product
• Asynchronous counter
• ESD protection
• Storage Registers
• Single Down Count-Control Line
• Functionally equivalent to the MC10/100EL29
• Storage registers
• Dynamic threshold performance
• Buffer registers