English

All Products

View All >>
  • SN74LVC574APWE4

SN74LVC574APWE4

8 Bit Flip Flop DUAL 20 Pins TSSOP


  • Manufacturer: Texas Instruments
  • Origchip NO: 815-SN74LVC574APWE4
  • Package: TSSOP
  • Datasheet: -
  • Stock: 481
  • Description: 8 Bit Flip Flop DUAL 20 Pins TSSOP(Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Mount Surface Mount
Package / Case TSSOP
Number of Pins 20
Weight 76.997305mg
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 125°C
Min Operating Temperature -40°C
Subcategory Bus Driver/Transceiver
Packing Method TUBE
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.8V
Terminal Pitch 0.65mm
Frequency 150MHz
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 20
Qualification Status Not Qualified
Polarity Non-Inverting
Temperature Grade AUTOMOTIVE
Number of Circuits 8
Max Supply Voltage 3.6V
Min Supply Voltage 1.65V
Load Capacitance 50pF
Number of Ports 2
Current - Output 24mA
Number of Bits 8
Propagation Delay 7.8 ns
Turn On Delay Time 7 ns
Family LVC/LCX/Z
Logic Function D-Type, Flip-Flop
Logic IC Type BUS DRIVER
Max I(ol) 0.024 A
High Level Output Current -24mA
Low Level Output Current 24mA
Number of Input Lines 3
Number of Output Lines 1
Clock Edge Trigger Type Positive Edge
Length 6.5mm
Width 4.4mm
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74LVC574APWE4 Overview


The flip flop is packaged in a case of TSSOP. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. Power is supplied from a voltage of 1.8V volts. A device of this type belongs to the family of LVC/LCX/Z. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 20 pins. In this device, the clock edge trigger type is Positive Edge. This device is part of the Bus Driver/Transceiverbase part number family. An electronic part with 8bits has been designed. Its flexibility is enhanced by 8 circuits. Considering its reliability, this T flip flop is well suited for TUBE. The D flip flop has no ports embedded. There are 1 output lines on it. It is reported that there are 3 input lines. -24mA is set as the high level output current. 24mAis set as the low level output current. It is recommended that the operating temperature be lower than 125°C. In order for the system to operate properly, the temperature should be higher than -40°C. Initially, it requires a voltage of 1.65V as the minimum supply voltage. It is capable of supporting a maximum supply voltage of 3.6V. 150MHzis the maximum frequency that can be achieved. BUS DRIVERis used as the logic IC in this D flip flop. There are 1 functions available on the JK flip flop. There are 20 pins on the D latch. Its output current of 24mA allows for maximum design flexibility.

SN74LVC574APWE4 Features


20 pins
8 Bits
1 Functions
20 pin count

SN74LVC574APWE4 Applications


There are a lot of Texas Instruments SN74LVC574APWE4 Flip Flops applications.

  • Modulo – n – counter
  • ESCC
  • Bounce elimination switch
  • Counters
  • Bus hold
  • Data transfer
  • Functionally equivalent to the MC10/100EL29
  • Data Synchronizers
  • High Performance Logic for test systems
  • Event Detectors