SN74LVC574AQDWREP

SN74LVC574AQDWREP Overview

20-SOIC (0.295, 7.50mm Width)is the way it is packaged. As part of the package Tape & Reel (TR), it is embedded. Tri-State, Non-Invertedis the output configured for it. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 2V~3.6Vvolts. It is at -40°C~125°C TAdegrees Celsius that the system is operating. It belongs to the type D-Typeof flip flops. This type of FPGA is a part of the 74LVC series. It should not exceed 150MHzin its output frequency. A total of 1elements are contained within it. During its operation, it consumes 10μA quiescent energy. The number of terminations is 20. You can search similar parts based on 74LVC574. Power is supplied from a voltage of 2.7V volts. A JK flip flop with a 4pFfarad input capacitance is used here. Electronic devices of this type belong to the LVC/LCX/Zfamily. There is an electronic component mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device's clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. This flip flop is designed with 8 Bits. In this case, the maximum supply voltage (Vsup) reaches 3.6V. For normal operation, the supply voltage (Vsup) should be kept above 2V. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. A power supply of 3.3Vis required to operate it. There are 2 ports embedded in the flip flops. The number of input lines is 8.

SN74LVC574AQDWREP Features

Tape & Reel (TR) package
74LVC series
20 pins
8 Bits
3.3V power supplies

SN74LVC574AQDWREP Applications

There are a lot of Texas Instruments SN74LVC574AQDWREP Flip Flops applications.

• ESD performance
• Memory
• Latch
• Instrumentation
• Balanced Propagation Delays
• Data transfer
• ESD protection
• Test & Measurement
• Differential Individual
• Single Down Count-Control Line