SN74LVC74APW

SN74LVC74APW Overview

As a result, it is packaged as 14-TSSOP (0.173, 4.40mm Width). You can find it in the Tubepackage. It is configured with Differentialas an output. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Surface Mount. The supply voltage is set to 1.65V~3.6V. In the operating environment, the temperature is -40°C~125°C TA. It is an electronic flip flop with the type D-Type. FPGAs belonging to the 74LVCseries contain this type of chip. Its output frequency should not exceed 150MHz Hz. There is 10μA quiescent consumption. Currently, there are 14 terminations. D latch belongs to the 74LVC74 family. A voltage of 1.8V provides power to the D latch. This T flip flop has a capacitance of 5pF farads at the input. A device of this type belongs to the family of LVC/LCX/Z. This electronic part is mounted in the way of Surface Mount. 14pins are included in its design. A Positive Edgeclock edge trigger is used in this device. There is a FF/Latchesbase part number assigned to the RS flip flops. Vsup reaches its maximum value at 3.6V. A power supply of 3.3Vis required to operate it. If high efficiency is to be achieved, the supply voltage should be maintained at 1.8V. The 24mA output current allows it to be designed with the greatest amount of flexibility. It has 1 output lines to operate. It is reported that there are 2 channels.

SN74LVC74APW Features

Tube package
74LVC series
14 pins
3.3V power supplies

SN74LVC74APW Applications

There are a lot of Texas Instruments SN74LVC74APW Flip Flops applications.

• Memory
• Control circuits
• Frequency Divider circuits
• Computers
• Computing
• Shift Registers
• ESCC
• Asynchronous counter
• Matched Rise and Fall
• Modulo – n – counter