SN74LVC74APWRE4

SN74LVC74APWRE4 Overview

The flip flop is packaged in 14-TSSOP (0.173, 4.40mm Width). The package Tape & Reel (TR)contains it. T flip flop uses Differentialas its output configuration. JK flip flop uses Positive Edgeas the trigger. There is an electric part mounted in the way of Surface Mount. A voltage of 1.65V~3.6Vis used as the supply voltage. It is operating at -40°C~125°C TA. This electronic flip flop is of type D-Type. The FPGA belongs to the 74LVC series. It should not exceed 100MHzin its output frequency. There is a consumption of 10μAof quiescent energy. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The object belongs to the 74LVC74 family. A voltage of 1.8V is used to power it. A JK flip flop with a 5pFfarad input capacitance is used here. Devices in the LVC/LCX/Zfamily are electronic devices. There is an electronic part that is mounted in the way of Surface Mount. This board has 14 pins. In this device, the clock edge trigger type is Positive Edge. There is a FF/Latchbase part number assigned to the RS flip flops. As soon as Vsup reaches 3.6V, the maximum supply voltage is reached. In order to achieve its superior flexibility, 2 circuits are used. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. It runs on 3.3Vvolts of power. With an output current of 24mA, this device offers maximum design flexibility. There are no output lines on the JK flip flop.

SN74LVC74APWRE4 Features

Tape & Reel (TR) package
74LVC series
14 pins
3.3V power supplies

SN74LVC74APWRE4 Applications

There are a lot of Texas Instruments SN74LVC74APWRE4 Flip Flops applications.

• Asynchronous counter
• Balanced Propagation Delays
• Frequency division
• ATE
• Memory
• Frequency Divider circuits
• Balanced 24 mA output drivers
• Single Up Count-Control Line
• Bus hold
• Computers