SN74LVC823ADW

SN74LVC823ADW Overview

The flip flop is packaged in 24-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tube. In the configuration, Tri-State, Non-Invertedis used as the output. It is configured with a trigger that uses Positive Edge. Surface Mountis in the way of this electric part. A voltage of 1.65V~3.6Vis used as the supply voltage. In the operating environment, the temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. The 74LVCseries comprises this type of FPGA. You should not exceed 150MHzin its output frequency. In total, it contains 1 elements. This process consumes 10μA quiescents. Terminations are 24. The object belongs to the 74LVC823 family. A voltage of 1.8V is used as the power supply for this D latch. JK flip flop input capacitance is 5pF farads. LVC/LCX/Zis the family of this D flip flop. There is an electronic part that is mounted in the way of Surface Mount. A total of 24pins are provided on this board. This device has Positive Edgeas its clock edge trigger type. The part you are looking for is included in FF/Latches. Flip flops designed with 9bits are used in this part. There are 2 ports embedded in the flip flops. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. In order to operate, the chip has 3 output lines. It is reported that there are 9 input lines. WITH CLEAR AND CLOCK ENABLEis also one of its characteristics.

SN74LVC823ADW Features

Tube package
74LVC series
24 pins
9 Bits

SN74LVC823ADW Applications

There are a lot of Texas Instruments SN74LVC823ADW Flip Flops applications.

• Frequency Dividers
• Buffer registers
• Functionally equivalent to the MC10/100EL29
• Pattern generators
• Counters
• Data storage
• Asynchronous counter
• ESD protection
• Patented noise
• Balanced Propagation Delays