SN74LVTH16374DLR

SN74LVTH16374DLR Overview

48-BSSOP (0.295, 7.50mm Width)is the way it is packaged. D flip flop is included in the Cut Tape (CT)package. Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. Powered by a 2.7V~3.6Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. In this case, it is a type of FPGA belonging to the 74LVTH series. You should not exceed 160MHzin its output frequency. In total, there are 2 elements. During its operation, it consumes 190μA quiescent energy. A total of 48 terminations have been made. This D latch belongs to the family of 74LVTH16374. A voltage of 3.3V provides power to the D latch. A 3pFfarad input capacitance is provided by this T flip flop. Devices in the LVTfamily are electronic devices. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 48. This device has Positive Edgeas its clock edge trigger type. This RS flip flops is a part number Bus Driver/Transceiver. There are 16bits in its design. Considering the reliability of this T flip flop, it is well suited for TR. The flip flop contains 2ports. In order to ensure high efficiency, the supply voltage should remain at 3.3V. With a current output of 64mA , it offers maximum design flexibility. It operates with 3 output lines. As of now, there are 1input lines.

SN74LVTH16374DLR Features

Cut Tape (CT) package
74LVTH series
48 pins
16 Bits

SN74LVTH16374DLR Applications

There are a lot of Texas Instruments SN74LVTH16374DLR Flip Flops applications.

• ESD protection
• Clock pulse
• ESCC
• Registers
• Single Down Count-Control Line
• Load Control
• QML qualified product
• Memory
• ATE
• CMOS Process