SN74LVU04ADR

SN74LVU04ADR Overview

The part can be shipped overseas conveniently because it is packaged in 14-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. This logic works according to the Inverter principle. In order for the part to function correctly, a voltage of 2V~5.5V is required. Operation at a temperature around -40°C~85°C. There is a hole in Surface Mount for mounting the part. Neither the high 12mA 12mA low state of output current is 12mA 12mA. 74LVU is the series it belongs to. Total terminations are 14. User experience is significantly enhanced by the part's 6 functions. As part of LVT, this chip is used. Try searching with 74LVU04 to find device variants. It is injected into the part body with 14 pins. This logic device is widely used in a wide variety of applications because it is Surface Mount mounted. Datasheets for functions of 14 pins are available. In the quiescent state, the part has 20μA current flowing through it. The logic device shown here is a typical Gates. A load capacitance of 50pF is provided by the part. To supply the device, it requires a voltage of 2V. The method TR has been incorporated into the package. This part requires 3.3V power supplies, according to its datasheet. The device's output current is rated 12mA. Totally, there are 6 elements used for operation. The operating supply voltage for the chip is specified as 5V volts, which corresponds to the chip voltage.

SN74LVU04ADR Features

Inverter Logic Type
Operating Temperature: -40°C~85°C
LVT Family
Quiescent Current: 20μA
Output Current: 12mA

SN74LVU04ADR Applications

There are a lot of Texas Instruments SN74LVU04ADR Gates and Inverters applications.

• VCD
• Solar energy generation
• Projector
• Digital camera
• Electricity for military and civilian life in areas without electricity
• Photovoltaic system
• In-vehicle system
• Grid adaptation function
• VCR
• Laptop