SN74S373DWRG4

SN74S373DWRG4 Overview

Package 20-SOIC (0.295, 7.50mm Width) includes it. Tape & Reel (TR) is the way it is packaged. There is a Tri-State output configured. D-Type Transparent Latch is the logic type of this electrical device. The way in which this electronic part is mounted is Surface Mount. In order for it to operate, it needs a supply voltage of 4.75V~5.25V. There is a temperature of 0°C~70°C at which the system operates. An FPGA in this series belongs to the 74S family. With this electronic part, there are 8 bits. In this device, there are 20 terminations. The family it belongs to is 74S373. The device works with a voltage of 5V for its supply voltage. It has 20 pins that makes it easy to use. It is a member of the S family of electronic devices. This board has 20 pins on it, which is what it is designed for. Surface Mount is used to mount this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It belongs to the subcategory of FF/Latches. It is possible to reach 5.25V when the maximum supply voltage (Vsup) has been reached. There are 5V power supplies required for this machine to operate. It is recommended to have a higher supply voltage (Vsup) than 4.75V. On the basis of its reliability, this device is well suited for TAPE AND REEL. 8 output lines generate the binary equivalent of the input lines. There is 32mA low level output current set. In the high level output current, the value is set to -6.5mA.

SN74S373DWRG4 Features

20-SOIC (0.295, 7.50mm Width) package
74S series
8 Bits
74S373 family
20 pin count
20 pins
5V power supplies

SN74S373DWRG4 Applications

There are a lot of Texas Instruments SN74S373DWRG4 Latches applications.

• Automotive Infotainment
• High-speed logic
• BCD counting
• Automotive Body Electronics
• Parallel Input
• Digital bus buffer
• Pattern Generators
• Relay
• Automotive ADAS
• PCs and Notebooks