SN74S374NSRG4

SN74S374NSRG4 Overview

The flip flop is packaged in a case of 20-SOIC (0.209, 5.30mm Width). As part of the package Tape & Reel (TR), it is embedded. This output is configured with Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 4.75V~5.25V. 0°C~70°C TAis the operating temperature. It is an electronic flip flop with the type D-Type. In terms of FPGAs, it belongs to the 74S series. It should not exceed 100MHzin its output frequency. The list contains 1 elements. It consumes 110mA of quiescent Terminations are 20. JK flip flop belongs to 74S374 family. Power is supplied from a voltage of 5V volts. This D flip flop belongs to the family of S. There is an electronic component mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device has the clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. An electronic part with 8bits has been designed. It reaches the maximum supply voltage (Vsup) at 5.25V. The supply voltage (Vsup) should be kept above 4.75V for normal operation. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The D latch operates on 5V volts. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A total of 8input lines have been provided. It is set to -6.5mAfor the high level output current. There is 20mA output current at the low level.

SN74S374NSRG4 Features

Tape & Reel (TR) package
74S series
20 pins
8 Bits
5V power supplies

SN74S374NSRG4 Applications

There are a lot of Texas Instruments SN74S374NSRG4 Flip Flops applications.

• Balanced 24 mA output drivers
• Individual Asynchronous Resets
• Frequency division
• Buffered Clock
• Single Down Count-Control Line
• Patented noise
• Control circuits
• Computing
• Cold spare funcion
• ESD performance