SN74S38NSR

SN74S38NSR Overview

Shipping overseas is convenient due to the part's packing in 14-SOIC (0.209, 5.30mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. According to NAND Gate logic, the algorithm works. To ensure the part's full function, a voltage of 4.75V~5.25V is needed. Increasing operating temperature to around 0°C~70°C. In Surface Mount, the part is mounted. Output current is - 60mA in the high and low states. 74S is the series it belongs to. Totally, there are 14 terminations. 4 functions in the part enhance the user experience significantly. The chip is part of the S family. Try searching with 74S38 if you're looking for device variants. 14 pins are injected into the part body. This logic device is widely used in a wide variety of applications because it is Surface Mount mounted. Datasheets for 14 pin functions are available upon request. A 2 input is supported by the part. In this logic device, the value is Gates. A load capacitance of 50pF is provided by the part. It is packed with the industry TR method. This part requires 5V power supplies, according to its datasheet. In this case, the output current is rated as 60mA. As part of the device, there are 1 outputs. The operation uses 4 elements in total. It is specified with the 5V volts voltage that the chip must be supplied with as its operating voltage. Among its features are Open Collector.

SN74S38NSR Features

NAND Gate Logic Type
Operating Temperature: 0°C~70°C
S Family
Output Current: 60mA

SN74S38NSR Applications

There are a lot of Texas Instruments SN74S38NSR Gates and Inverters applications.

• Illumination
• Overcurrent/Short circuit protection
• Electric car
• Sewing machine
• Digital camera
• Roof distributed power station
• Printer
• MPPT function (maximum power point tracking)
• Overvoltage and undervoltage protection
• Troubleshooting & Judgment