SN75178BPSR

SN75178BPSR Overview

As a convenience to the user, power buffer has been packaged in 8-SOIC (0.209, 5.30mm Width).The package is ready for power buffer in Tape & Reel (TR) pieces.Surface Mount Universal mout for easy adaptation.As for types, this is an example of a typical Buffer, ReDriver.For its operation, this op amp buffer uses a voltage of 4.75V~5.25V.There should be a setting of 0°C~70°C for the operating temperature in order to avoid any malfunctions.The operational amplifier buffer is targeted at applications such as RS422, RS485 and others.Search with "SN75178" to get more pin-to-pin solutions.The op amp buffer has 8 terminals that can be found along its length.The peak reflow temperature of the power buffer is NOT SPECIFIED.Due to the 5V voltage supply, this splitter can handle a multitude of demanding tasks.A Power buffer's pinout is determined by the number of pins that it has and starts with 8.There are 8 pins on it.In addition to the Surface Mount axis, it has a female hole for mounting to PCBs or other boards.In addition to the power buffer, other Line Driver or Receivers also play an important role.In order for this power buffer to operate, a voltage of 70mA must be applied.For normal operation, 5V voltage is required.The repeters can be powered by 5V power supplies.A nominal supply current of 57mA is required for normal use of the splitter.The repeater signal implements 1 receivers.POSITIVE AND NEGATIVE CURRENT LIMITING 3-STATE OUTPUTS works in certain areas, while repeter specializes in others.

SN75178BPSR Features

Mainly used in RS422, RS485.
A standard Line Driver or Receivers.
POSITIVE AND NEGATIVE CURRENT LIMITING 3-STATE OUTPUTS.

SN75178BPSR Applications

There are a lot of Texas Instruments SN75178BPSR Signal Buffers, Repeaters, Splitters applications.

• Network Switches/Routers
• Industrial/Embedded PC
• Clock Distribution
• Servers
• Cable Repeaters
• Multidrop Buses
• Digital Crossconnects
• Clock Distribution
• Industrial PCs
• Digital Cross-Connects