SN75372DR

SN75372DR Overview

For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.A packaging method of Cut Tape (CT) is indicated.There are 2 drivers installed for this device.Surface Mount is the way in which it is mounted.In the absence of a power supply voltage of 4.75V~5.25V 4.75V~24V V, it is able to demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.For this device, the temperature range is 0°C~70°C TA.Mosfet driver uses Inverting as Mosfet drivers input type.Its configuration starts with 8 terminations.There are various parts that can be found under its base part number SN75372.You mount it with Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.Specification is for 5V supply voltage operation.In this case, NAND GATE BASED MOSFET DRIVER serves as the interface IC.Mosfet driver is possible for the output current to be as low as 500mA.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.The board contains 8 pins for component connections.500mA is the maximum output current supported by the device.Based on the maximum power dissipation of 725mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.As a precaution, make sure the supply current is kept at 24mA.A voltage of 24V is output by this device.During operation, a voltage of 24mA is applied to the power supply.Mosfet gate drivers receives an input of STANDARD.

SN75372DR Features

Embedded in the Cut Tape (CT) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 725mW

SN75372DR Applications

There are a lot of Texas Instruments SN75372DR gate drivers applications.

• UPS systems
• Refrigerator
• Commercial and agricultural vehicles (CAV)
• General Purpose 3-Phase Inverter
• DC-DC Converters
• Isolated Gate Driver Supplies
• Motor Drives
• Isolated Supplies for Motor Control
• Motor controllers
• Motor Controls