SN75DP119RGYR

SN75DP119RGYR Overview

Packaging is convenient because power buffer comes in 14-VFQFN Exposed Pad.In Tape & Reel (TR) packages, ready for power buffer.The Surface Mount universal mout has the advantage of being easily adaptable.As for types, this is your typical Buffer, ReDriver.There is 3V~3.6V voltage used to power this op amp buffer. It works on 3V~3.6V voltage.It is important that the 2 channels cooperate in order to maintain a high level of output.It is recommended to set the operating temperature to 0°C~85°C to prevent malfunctions.Search with "75DP119" to get more pin-to-pin solutions.As you can see in the picture, the op amp buffer has 14 terminals.The peak reflow temperature of the material is 260.This Power buffer has a pinout that starts from its 14 pins, which are the first pins on the board.There is a DisplayPort output from it.The 14 pins are on it.Using 31.7mA as a voltage, this power buffer operates.You are not supposed to feed the repeter with voltage higher than 3.6V.The splitter must have at least 3V to be able to start up.

SN75DP119RGYR Features

2 channels.

SN75DP119RGYR Applications

There are a lot of Texas Instruments SN75DP119RGYR Signal Buffers, Repeaters, Splitters applications.

• Storage Area Networks
• PECL-to-LVDS Translation
• Clock Distribution
• Cable Repeaters
• Cellular Phone Base Stations
• Backplane Interconnect
• Desktop Computers
• Servers
• Medical
• Digital Cross-Connects