SN75LVPE801DRFR

SN75LVPE801DRFR Overview

Power buffer is packaged in 8-WFDFN Exposed Pad for convenient transportation.Power buffer ready in Tape & Reel (TR) packages.A universal mount that's easy to adapt.Type-wise, this is a Buffer, ReDriver.For its operation, this op amp buffer uses a voltage of 3V~3.6V.In order for the output quality to be maintained, 1 channels must work together.This facilitates CML input.To make sure that the cooling system does not malfunction, you should set the operating temperature to 0°C~85°C.An operational amplifier buffer like this is targeted at SATA and other applications as well.You can get more pin-to-pin solutions for your specific needs by searching with "75LVPE801".There is a 8 terminal on the op amp buffer, which can be seen in the picture below.VML is the output unit.In addition, it has 8 pins.OP amp buffers 29mA.Repeters cannot be fed voltages higher than 3.6V.3V is required at least to start the splitter.

SN75LVPE801DRFR Features

1 channels.
Mainly used in SATA.

SN75LVPE801DRFR Applications

There are a lot of Texas Instruments SN75LVPE801DRFR Signal Buffers, Repeaters, Splitters applications.

• PECL-to-LVDS Translation
• Laptop Computers (for External Video Cards)
• Digital Crossconnects
• Portable IPC/HMI
• Clock Distribution
• Desktop Computers
• Medical
• Storage Area Networks
• Data or Clock Signal Amplification
• Network Switches/Routers