SNJ54LS283J

SNJ54LS283J Overview

In the CDIPpackage, it is supplied. It is configured using 16terminations. 5Vis enabled to operate in an extremely flexible manner due to its supply voltage. 1 elements are interconnected in wires. A total of 16pins are present on all components. As part of the circuit, there are 16pins that connect other components. It is mounted in the way of [0]. It is a member of the family [0]. The device contains information consisting of 4bits. Among the features of this electronic device, FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD; PERMITS RIPPLE CARRY CASCADINGare essential. It is manufactured in the temperature grade MILITARY. Its packaging is provided by [0]. In this case, 5Vvoltage is generated by the voltage source. To operate, the device requires a voltage of [0]. Long-term operation at 125°Cwith acceptable electrical stability is possible. It operates within a specified temperature range, with the lower limit typically set at -55°C degrees Celsius. The maximum voltage available for the device reaches 5.5V. It is possible to supply the device with a voltage as low as 4.5V. This electronic part belongs to the Arithmetic Circuits family. It uses a logic IC type of [0]. A specified high-level voltage produces -400μAcurrent in the output. There is 4mA current flowing into the output terminal at a specified low-level voltage.

SNJ54LS283J Features

Embedded in the CDIP package
FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD; PERMITS RIPPLE CARRY CASCADING
Operating supply voltage of 5V
ADDER/SUBTRACTOR as logic IC type

SNJ54LS283J Applications

There are a lot of Texas Instruments SNJ54LS283J Counters & Dividers applications.

• Divide-by"N" counters/frequency synthesizers
• Programmable binary and decade
• TRUE RMS-TO-DC CONVERSION
• SQUARING
• ANALOG SIGNAL PROCESSING
• Fixed and programmable counters greater than 10
• Decade counter/decimal decode display (CD4017B）
• Binary counter/decoder
• Timing applications
• Divide-by-N counting