SNJ54S280J

SNJ54S280J Overview

CDIPis a package in which this device is packaged. 14 terminations are used for its configuration. The supply voltage of 5V enables it operate in a fully flexible way. The 1elements are connected by wires. In all, there are 14 pins on each component. Rail/Tubeis used to package it. As part of the circuit, there are 14pins that connect other components. Through Holeis the way in which it is mounted. The Sfamily includes it. The device stores 9bits of information. It is important to note that in regards to this electronic device, ODD/EVEN PARITY GENERATORis an extremely significant feature. A temperature grade of MILITARYis specified for this device. From the voltage source, there is 5Vvoltage. For the device to operate, a voltage supply of 5Vis required. This device operates at 125°C°C for extended periods of time with acceptable electrical stability. Generally, the temperature limit is set at -55°Cso it will operate over a specified range. In this case, the maximum voltage available to the device is 5.5V. In the case of this device, the minimum voltage is as low as 4.5V volts. It is part of the Arithmetic Circuitsfamily of electronic components. PARITY GENERATOR/CHECKER refers to the type of logic IC it is using. An output voltage of a certain high level causes -1mAcurrent to flow into the output. If a specified low-level voltage is applied to the output terminal, there is 20mA current flowing.

SNJ54S280J Features

Embedded in the CDIP package
ODD/EVEN PARITY GENERATOR
Operating supply voltage of 5V
PARITY GENERATOR/CHECKER as logic IC type

SNJ54S280J Applications

There are a lot of Texas Instruments SNJ54S280J Counters & Dividers applications.

• ALGEBRAIC COMPUTATION
• Frequency dividing circuits
• Divide-by"N" counters/frequency synthesizers
• Fixed or Programmable Frequency Division
• Time-delay circuits
• Timing applications
• Control counters
• Binary counter/decoder
• TRUE RMS-TO-DC CONVERSION
• Counter control/timers