All Products

ST890BDR

3/5V P-Channel PMIC ST890 8 Pin 3V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: STMicroelectronics
  • Origchip NO: 761-ST890BDR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 764
  • Description: 3/5V P-Channel PMIC ST890 8 Pin 3V 8-SOIC (0.154, 3.90mm Width) (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Factory Lead Time 10 Weeks
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 90mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Peripheral Drivers
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Current Rating 1.2A
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number ST890
Pin Count 8
Number of Outputs 1
Output Type P-Channel
Max Output Current 1.2A
Operating Supply Voltage 5.5V
Power Supplies 3/5V
Interface On/Off
Nominal Supply Current 13mA
Output Configuration High Side
Output Current 1.2A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 13mA
Input Type Non-Inverting
Turn On Delay Time 50 μs
Switch Type General Purpose
Min Input Voltage 2.7V
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Turn-Off Delay Time 10 μs
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Driver Number of Bits 1
Fault Protection Current Limiting (Adjustable), Over Temperature
Output Peak Current Limit-Nom 1.2A
Rds On (Typ) 75m Ω
Built-in Protections OVER CURRENT; THERMAL
Length 4.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

ST890BDR Overview


Tape & Reel (TR) is how it's packaged.It's included in the 8-SOIC (0.154, 3.90mm Width) package.A Surface Mount mounting is used for the LED driving board.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.By default, it is set to output 1.It uses a supply voltage of Not Required to operate.The maximum output voltage is P-Channel volts.The ST890 family contains this object.As a result, there are 8 terminations.The operation is performed through the 8 pins.It contains 1 functions.As a result, the maximum output current is reduced to 1.2A in order to meet the operation requirements.The supply voltage can be 3V for high efficiency.It is positioned in the direction of Surface Mount.The LED driving board is equipped with a total of 8 pins.The LED driver has 90mOhm resistance.In this case, the output current will be set to 1.2A.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.3/5V is the power supply of the part.When using this LED driving board, it is recommended that the supply voltage is set to 5.5V.The maximum input voltage of the LED driver is 5.5V volts.It has a 2.7V volt minimum input voltage.It operates at a maximum current of 13mA.

ST890BDR Features


Supplied from 3V
Resistance of 90mOhm

ST890BDR Applications


There are a lot of STMicroelectronics ST890BDR Power Switches ICs applications.

  • Wireless/Networking Cards
  • Wearable Devices
  • Notebook and Tablet Computers
  • Wireless Headsets
  • Hot Swaps
  • Portable/Handheld Devices
  • Hot-Swap Systems
  • PC Card Hot Swap
  • USB Power Distribution
  • Gaming