All Products

ST890CDR

3/5V P-Channel PMIC ST890 8 Pin 3V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: STMicroelectronics
  • Origchip NO: 761-ST890CDR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 675
  • Description: 3/5V P-Channel PMIC ST890 8 Pin 3V 8-SOIC (0.154, 3.90mm Width) (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Lead Free Lead Free
Factory Lead Time 10 Weeks
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 90mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Peripheral Drivers
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Current Rating 1.2A
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number ST890
Pin Count 8
Number of Outputs 1
Output Type P-Channel
Max Output Current 1.2A
Operating Supply Voltage 5.5V
Power Supplies 3/5V
Interface On/Off
Nominal Supply Current 13mA
Output Configuration High Side
Output Current 1.2A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 13mA
Input Type Non-Inverting
Turn On Delay Time 50 μs
Switch Type General Purpose
Min Input Voltage 2.7V
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Turn-Off Delay Time 10 μs
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Driver Number of Bits 1
Fault Protection Current Limiting (Adjustable), Over Temperature
Output Peak Current Limit-Nom 1.2A
Rds On (Typ) 75m Ω
Built-in Protections OVER CURRENT; THERMAL
Length 4.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

ST890CDR Overview


Tape & Reel (TR) is how it's packaged.This file is included in package 8-SOIC (0.154, 3.90mm Width).The lighting driver is mounted in the Surface Mount position.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.As a default, the output is set to 1.Operation is based on Not Required supply voltage.A maximum output voltage of P-Channel volts can be achieved by this LED driver.It belongs to the family ST890.A total of 8 terminations have been found in it.It is necessary to use the 8 pins in order to operate the LED driver.It consists of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 1.2A.Using a voltage of 3V allows for high efficiency.Surface Mount is mounted in the way of this LED driving board.It is equipped with a total of 8 pins.It has 90mOhm resistance.This case results in a 1.2A output current.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.The power supply of the part is 3/5V.In order to maximize efficiency, the supply voltage should be set at 5.5V.Input voltage is limited to 5.5V volts.A voltage of 2.7V volts is the minimum input voltage.This system has a maximum current requirement of 13mA.

ST890CDR Features


Supplied from 3V
Resistance of 90mOhm

ST890CDR Applications


There are a lot of STMicroelectronics ST890CDR Power Switches ICs applications.

  • Wireless Headsets
  • Hot-Swap Systems
  • HDD, SSD
  • Solid State Drivers
  • Wearable Devices
  • Low Voltage I/O System Power
  • Storage (HDDs, SSDs)
  • Various applications equipped with buttons
  • Portable Video Game Players
  • USB3.1 Power Delivery