STM32F334C6T6

STM32F334C6T6 Description

The STM32F334x4/6/8 family incorporates the high-performance Arm? Cortex?-M4 32-bit RISC core operating at up to 72 MHz frequency embedding a floating point unit (FPU), high-speed embedded memories (up to 64 Kbytes of Flash memory, up to 12 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses.

The STM32F334x4/6/8 microcontrollers offer two fast 12-bit ADCs (5 Msps), up to three ultra-fast comparators, an operational amplifier, three DAC channels, a low-power RTC, one high-resolution timer, one general-purpose 32-bit timer, one timer dedicated to motor control, and four general-purpose 16-bit timers. They also feature standard and advanced communication interfaces: one I2C, one SPI, up to three USARTs, and one CAN.

STM32F334C6T6 Features

Core: Arm? Cortex?-M4 32-bit CPU with FPU

(72 MHz max), single-cycle multiplication and

HW division DSP instruction

Memories

– Up to 64 Kbytes of Flash memory

– Up to 12 Kbytes of SRAM with HW parity

check

– Routine booster: 4 Kbytes of SRAM on

instruction and data bus with HW parity

check (CCM)

CRC calculation unit

Reset and supply management

– Low-power modes: Sleep, Stop, Standby

– VDD,VDDA voltage range: 2.0 to 3.6 V

– Power-on/Power-down reset (POR/PDR)

– Programmable voltage detector (PVD)

– VBAT supply for RTC and backup registers

Clock management

– 4 to 32 MHz crystal oscillator

– 32 kHz oscillator for RTC with calibration

– Internal 8 MHz RC (up to 64 MHz with PLL

option)

– Internal 40 kHz oscillator

Up to 51 fast I/O ports, all mappable on

external interrupt vectors, several 5 V-tolerant

Interconnect matrix

7-channel DMA controller