STM6322TWY6F

STM6322TWY6F Overview

There are 5 terminals connected to this power management, which makes it easy to mount. This power ic is packaged in a way that looks like a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. Power ics operate at 1 supply voltages. The power management is mounted by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 5 pins that are attached to IC management. 5 pins make up the power management. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Open Drain, Push-Pull as the output voltage. There is a 12μA supply current present in the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to STM6322, which is the base power ics number. The power management can work with a maximum supply temperature of 12μA.

STM6322TWY6F Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
12μA operating supply current

STM6322TWY6F Applications

There are a lot of STMicroelectronics STM6322TWY6F Voltage Supervisors applications.

• Leakage current detection
• Automotive power systems
• Digitally controlled LDO regulators circuit
• DVR
• Embedded computing
• Important electronics for automotive safety
• Battery-powered equipment
• Battery cars
• Dash board
• Efficient information transmission