STM6510SCACDG6F

STM6510SCACDG6F Overview

Power management is mounted through 8 terminals. Power management is packaged in a Tape & Reel (TR) way. The purpose of this IC management is to provide you with a reference of 1 functions. Power management consists of 1 channels, each of which can be used independently. Please find attached 8-WFDFN functions for your reference in this IC power. There are a lot of similarities between this IC power and other Reset Timer products. IC management is specified that the package peak reflow temperature should be 260. When 3V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. This power ic can be sub-categorized as Power Management Circuits. In total, the power management has 8 pins in it. There are 8 pins on the power managment ic. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than -300mV volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 7V volts. Surface Mount mounting is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. If you want to search for similar IC managements of this manufacturer, you can always refer to STM6510, which is the base power ics number. The IC power comes from the well-known Smart Reset? series.

STM6510SCACDG6F Features

Reset Timer type
Minimum supply voltage of -300mV

STM6510SCACDG6F Applications

There are a lot of STMicroelectronics STM6510SCACDG6F Voltage Supervisors applications.

• Low voltage/high power - AI, GPU
• Set top box
• emergency room
• Transformer load monitoring equipment
• Important electronics for automotive safety
• Kitchen appliances
• Rechargeable batteries
• Automotive permanent magnet synchronous motors
• Power distribution systems of operating room
• Microprocessor system