STM704SM6E

STM704SM6E Overview

There are 8 terminals on this power management that allow it to be mounted. It is packaged with Tube. In this PMIC, you can find 1 functions for your reference. There are a total of 1 channels on this supervisor, and they are arranged in a series. As a reference, this IC power includes 8-SOIC (0.154, 3.90mm Width) functions for your convenience. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. The supervisor is always powered by a 3.6V volt supply. Power ics operate at 1 supply voltages. The power management is mounted by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. There are a total of 8 pins on power management. There are 8 pins on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. For this power management, there is an 60μA volt supply current. To find similar IC managements from the manufacturer, you can always search by STM704. It is necessary to have 3.3/5V volts of power in order for this voltage supervisor to operate. Voltage supervisor can work with a supply temperature of 60μA at the most.

STM704SM6E Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

STM704SM6E Applications

There are a lot of STMicroelectronics STM704SM6E Voltage Supervisors applications.

• Electrical fire monitoring system
• DVR
• Smart meter
• Military electronics
• Multi-voltage system
• Display equipment
• Refrigeration
• Personal computers
• Digitally controlled LDO regulators circuit
• Dash board