STM706M6F

STM706M6F Overview

It is mounted through 8 terminals on the power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Power management is possible to find a series of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 5V volt supply. In a 1 supply voltage, the PMIC chip conducts. Power management is included in the Surface Mount mount. The power management system can be categorized as a Power Management Circuits chip. In total, the power management has 8 pins in it. This power management has 8 pins. IC management can only work with a supply voltage of 1V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. You should set the supervisor's temperature during -40°C~85°C TA . As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For this power management, there is an 40μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to STM706, which is the base power ics number. A maximum supply temperature of 60μA can be used.

STM706M6F Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
40μA operating supply current

STM706M6F Applications

There are a lot of STMicroelectronics STM706M6F Voltage Supervisors applications.

• Radar
• Rechargeable batteries
• Set top box
• Battery cars
• Electronics installed in the vehicle
• Power distribution systems of operating room
• Transformer load monitoring equipment
• Linux and server computing
• Magnetic resonance imaging
• Power distribution systems of infant care room