STM707M6F

STM707M6F Overview

This power management consists of 8 mounting terminals on which it can be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. The supervisor is always powered by a 5V volt supply. IC management conducts in a 1-voltage supply. Surface Mount mounts IC management. The power management system can be categorized as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. There are 8 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. For this power management, there is an 60μA volt supply current. To find similar IC managements from the manufacturer, you can always search by STM707. The power management can work with a maximum supply temperature of 60μA.

STM707M6F Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

STM707M6F Applications

There are a lot of STMicroelectronics STM707M6F Voltage Supervisors applications.

• Detection of phase loss
• Detection of phase imbalance
• Radar
• Smartphones
• Radio
• FPGA design
• Microcontroller system
• DC stabilized power supply module
• Important electronics for automotive safety
• Personal computers