STM811TW16F

STM811TW16F Overview

This power management consists of 4 mounting terminals on which it can be mounted. Cut Tape (CT)-packaging is used. As a reference, this IC management includes 1 functions for your convenience. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of TO-253-4, TO-253AA functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. A supply voltage of 3.3V is used to conduct the PMIC chip. Power management conducts at a voltage of 1. The mount is provided by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. Taking into account all of the pins, this power management has a total of 4. 4 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The supervisor's supply current is specified to 15μA. To find similar IC managements from the manufacturer, you can always search by STM811. The maximum supply temperature voltage supervisor can handle is 15μA.

STM811TW16F Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current

STM811TW16F Applications

There are a lot of STMicroelectronics STM811TW16F Voltage Supervisors applications.

• Personal computers
• Medical-specific isolation transformer
• Linux and server computing
• Satellite navigation
• Power distribution systems of ICU
• Consumer electronics
• Dash board
• Rechargeable batteries
• Transformer load monitoring equipment
• Electrical fire monitoring system