STM8L152C8U6

STM8L152C8U6 Description

In order to maintain the benefits of a CISC architecture with improved code density, a 24-bit linear addressing space, and optimized architecture for low-power operations, the high-density and medium+ density STM8L152C8U6 ultra-low-power device includes an enhanced STM8 CPU core. This core increases processing power (up to 16 MIPS at 16 MHz).

The family has an integrated debug module with a hardware interface (SWIM) that enables rapid Flash programming and non-intrusive in-application debugging.

All STM8L152C8U6 high-density and medium+ density microcontrollers have low-power, low-voltage single-supply program Flash memory and embedded data EEPROM.

A 12-bit ADC, two DACs, two comparators, a real-time clock, four 16-bit timers, one 8-bit timer, and a number of common communication interfaces, including three USARTs, two SPIs, and an I2C interface, are all included in the devices. The STM8L152C8U6 gadget comes with an 8x40 or 4x44-segment LCD. The peripheral set's modular construction enables the use of the same peripherals across many ST microcontroller families, including 32-bit generations. This makes switching to a new family quite simple, and using a standard set of development tools makes it much simpler.

STM8L152C8U6 Features

•  Memories

– Up to 64-Kbytes of Flash memory with up to 2 Kbytes of data EEPROM with ECC and RWW

– Flexible write/read protection modes

– Up to 4 Kbytes of RAM

• 2 ultra-low-power comparators

– 1 with fixed threshold and 1 rail to rail

– Wake up capability

• Timers

– Three 16-bit timers with 2 channels (IC, OC, PWM), quadrature encoder

– One 16-bit advanced control timer with 3 channels, supporting motor control

– One 8-bit timer with 7-bit prescaler

– One window, one independent watchdog

– Beeper timer with 1, 2 or 4 kHz frequencies

• Communication interfaces

– Two synchronous serial interface (SPI)

– Fast I2C 400 kHz SMBus and PMBus

– Three USARTs (ISO 7816 interface + IrDA)

• Up to 67 I/Os, all mappable on interrupt vectors

• Up to 16 capacitive sensing channels supporting touchkey, proximity, linear touch and rotary touch sensors

• Fast on-chip programming and non-intrusive debugging with SWIM, Bootloader using USART

• 96-bit unique ID

• Clock management

– 32 kHz and 1-16 MHz crystal oscillators

– Internal 16 MHz factory-trimmed RC and 38 kHz low consumption RC

– Clock security system

• Low-power RTC

– BCD calendar with alarm interrupt

– Digital calibration with +/- 0.5ppm accuracy

– Advanced anti-tamper detection

• LCD: 8x40 or 4x44 w/ step-up converter

• DMA

– 4 ch. for ADC, DACs, SPIs, I2C, USARTs, Timers, 1 ch. for memory-to-memory

• 2x12-bit DAC (dual mode) with output buffer

• 12-bit ADC up to 1 Msps/28 channels

– Temp. sensor and internal ref. voltage

• Operating conditions

– Operating power supply: 1.65 to 3.6 V

(without BOR), 1.8 to 3.6 V (with BOR)

– Temp. range: -40 to 85, 105 or 125 °C

• Low-power features

– 5 low-power modes: Wait, Low-power run (5.9 μA), Low-power wait (3 μA), Activehalt with full RTC (1.4 μA), Halt (400 nA)

– Consumption: 200 μA/MHz+330 μA

– Fast wake up from Halt mode (4.7 μs)

– Ultra low leakage per I/0: 50 nA

• Advanced STM8 core

– Harvard architecture and 3-stage pipeline

– Max freq: 16 MHz, 16 CISC MIPS peak

– Up to 40 external interrupt sources

• Reset and supply management

– Low-power, ultra safe BOR reset with five programmable thresholds

– Ultra-low-power POR/PDR

– Programmable voltage detector (PVD)

STM8L152C8U6 Applications

• PC peripherals, gaming, GPS and sport equipment

• Alarm systems, wired and wireless sensors

• Metering

• Medical and handheld equipment

• Application control and user interface