TC1232EOE

TC1232EOE Overview

A total of 16 terminals are used to mount this power management. It is packaged with Tube. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for 16-SOIC (0.295, 7.50mm Width) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Packages are specified to have an average peak reflow temperature of 260. During operation, the power ic is supplied with a voltage of 5V. Power management conducts at a voltage of 1. The mount is provided by Surface Mount. This power ic can be sub-categorized as Power Management Circuits. There are a total of 16 pins on power management. 16 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 4V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. The supply current of the power management is 200μA. It is always advisable to use TC1232, the base supervisor number, when searching for similar PMICs from the manufacturer. To be able to work, this power management requires 5V volts of power. The maximum supply temperature that PMIC chip can work with is 200μA.

TC1232EOE Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 4V
200μA operating supply current

TC1232EOE Applications

There are a lot of Microchip Technology TC1232EOE Voltage Supervisors applications.

• Electric heating appliances
• Insulation fault location system
• Automotive power systems
• Efficient information transmission
• Military electronics
• DSP
• Analog circuit
• Medical-specific isolation transformer
• Smartphones
• Display equipment