TC1232EOE713

TC1232EOE713 Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. Tape & Reel (TR)-packaging is used. As a reference, this IC management includes 1 functions for your convenience. A series of 1 channels can be found on this supervisor. IC management is packaged as a 16-SOIC (0.295, 7.50mm Width) package. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 5V-voltage supply. During operation, the power ic is supplied with a voltage of 1. Power management is included in the Surface Mount mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, IC powers are 16 pins on the board. 16 pins are on the supervisor. There should be a minimum voltage supply (Vsup) of 4V for this PMIC. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The mounting type of the supervisors is Surface MountIt is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. For this power management, there is an 200μA volt supply current. You can always use TC1232, the base supervisor number, to search for similar PMICs of the manufacturer. The power management must be powered by 5V volts to function properly. A maximum supply temperature of 200μA can be used with this power management.

TC1232EOE713 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 4V
200μA operating supply current

TC1232EOE713 Applications

There are a lot of Microchip Technology TC1232EOE713 Voltage Supervisors applications.

• Automotive permanent magnet synchronous motors
• Leakage protection
• Radar
• Smart meter
• Unattended substation automation
• External alarm
• Display equipment
• Precision measurement
• Functional modules
• DVR