TC1410CPA

TC1410CPA Overview

There is greater flexibility with the 8-DIP (0.300, 7.62mm) package.Tube represents the packaging method.Ideally, it should be mounted in the direction of Through Hole.Using a 4.5V~16V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.N-Channel, P-Channel MOSFET is the gate type used for this design.For this device, the temperature range is 0°C~150°C TJ.This program uses the input type of Inverting.Its configuration starts with 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number TC1410.Mosfet driver is mounted using Through Hole.There are 8 pins available in the device.With a supply voltage of 16V, it is designed to operate.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.As a maximum, there is 500mA limit to the output current.Several electronic components are included in its subcategory of MOSFET Drivers.The board contains 8 pins for component connections.Based on its basis, it integrates 1 outputs.The maximum power dissipation of 730mW shows its maximum capability to transfer and conduct power loss without overheating.The supply current should be kept at 1mA to ensure higher stability.The resistance of the device is 28Ohm.

TC1410CPA Features

Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
Resistance of 28Ohm

TC1410CPA Applications

There are a lot of Microchip Technology TC1410CPA gate drivers applications.

• PCMCIA applications
• Active filtering
• UPS systems
• High power buffers
• Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
• Isolated Supplies for Motor Control
• Motor Control
• Power factor correction (PFC) circuits
• Industrial Motor Inverter - Power Tools, Robotics
• Smart Phones