TC54VN2102EZB

TC54VN2102EZB Overview

There are 3 terminals on this power management that allow it to be mounted. There is a Bulk-packaging method applied to IC management. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. As a reference, this IC power includes TO-226-3, TO-92-3 (TO-226AA) functions for your convenience. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Manage ics operate at 2V supply voltages. Power management conducts at a voltage of 1. Power management is included in the Through Hole mount. The power management system can be categorized as a Power Management Circuits chip. There are 3 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 700mV. The maximum supply voltage (Vsup) is not to exceed 10V volts in this IC management. Power management recommends the Through Hole mounting type. You should set the supervisor's temperature during -40°C~85°C TA . There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The power management's supply current is 3.6μA. To find similar IC managements from the manufacturer, you can always search by TC54VN2102.

TC54VN2102EZB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current

TC54VN2102EZB Applications

There are a lot of Microchip Technology TC54VN2102EZB Voltage Supervisors applications.

• Utility meter
• Network equipment
• Important electronics for automotive safety
• Electronics installed in the vehicle
• Radio
• Automotive permanent magnet synchronous motors
• Important electronics for automotive protection
• Digitally controlled LDO regulators circuit
• DVR
• DSP