TCM810TENB713

TCM810TENB713 Overview

A total of 3 terminals are used to mount this power management. Cut Tape (CT)-packaging is used. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. To assist you, this PMIC includes TO-236-3, SC-59, SOT-23-3 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 3 pins in it. 3 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 9μA. You can always use TCM810, the base supervisor number, to search for similar PMICs of the manufacturer.

TCM810TENB713 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
9μA operating supply current

TCM810TENB713 Applications

There are a lot of Microchip Technology TCM810TENB713 Voltage Supervisors applications.

• Power distribution systems of operating room
• Refrigeration
• Satellite navigation
• Set top box
• Important electronics for automotive safety
• Power distribution systems of ICU
• Magnetic resonance imaging
• Embedded computing
• Rechargeable batteries
• DSP