TIBPAL20R8-10CNT

TIBPAL20R8-10CNT Overview

The PLD stock is mounted with Type Through Hole screws.Programmable logic devices are PAL that is programmable.There is no better value on the market than IMPACT-X? PAL? Series in terms of performance and cost.As a result of Programmable logic array's package, the 24-DIP (0.300, 7.62mm) is widely used in electronics.Programmable array logic's Packaging is made from Tube-materials.The number TIBPAL20R8 refers to the PLD stock's largest part.The PLD is mounted in the way of Through Hole.For the Complex Programmable logic device, 24 remains the pin number.When Programmable logic devices are operated at 71.4MHz frequency, it continues to function accurately.Programmable logic devices are currently possible to work at a maximum temperature of 75°C.It should be warmer when operating than 0°C.Using a 4.75V volt supply voltage is the only way for it to work.The PLD can only be operated with a 5.25V supply voltage.5V is always used to power the Complex Programmable logic device.Inputs are dedicated to 12 on this board.Into it has been programmed a 24 termination.There is also the possibility of applying the Programmable Logic Devices subcategory.The Programmable logic device is supplied by 5V.Product terms are represented by 64.There are numerous 8 outputs.5V voltage is required in order to operate it.A board with 24 pins has specific purposes.In addition, REGISTER PRELOAD; POWER-UP RESET is among the additional features.

TIBPAL20R8-10CNT Features

Mounting type of Through Hole
Maximum temperature of 75°C

TIBPAL20R8-10CNT Applications

There are a lot of Texas Instruments TIBPAL20R8-10CNT PLDs (Programmable Logic Device) applications.

• Software
• Programmable Logic Devices
• High-end communication equipment
• Highly complex logic
• Low power applications
• high-performance microcomputer systems
• Electrically Devices
• Microcomputer systems
• Power-limited applications
• Battery operated devices