TIBPAL20R8-7CNT

TIBPAL20R8-7CNT Overview

Type Through Hole mounts the PLD stock.There is a programmable type of PLD Programmable logic device? called PAL.IMPACT-X? PAL? Series has the best performance-cost ratio available.Electronics manufacturers use the 24-DIP (0.300, 7.62mm) because of Programmable logic array's package.A Tube-material can be used for Programmable array logic's Packaging.In the PLD stock, TIBPAL20R8 corresponds to the largest part.Through Hole is the direction in which the PLD is mounted.For the Complex Programmable logic device, 24 remains the pin number.The PLD can still operate precisely at frequency 100MHz.75°C is the current maximum working temperature.It should be warmer when operating than 0°C.Supply voltage must be 4.75V volts for it to operate.There is no alternative to the 5.25V supply voltage for this PLD.5V is always used to power the Complex Programmable logic device.The 12 inputs are embedded into the PLD.Programming has included a 24 termination.It can be assigned to the Programmable Logic Devices subcategory.Supplies 5V are used in the Programmable logic device.In this case, 64 refers to the number of product terms available.Programmable logic devices are possible to output 8 in a number of ways.5V voltage is needed for it to operate.It has a sum of 24 pins.At most, it can handle a supply temperature of 210mA.Additions like REGISTER PRELOAD; POWER-UP RESET are among them.

TIBPAL20R8-7CNT Features

Mounting type of Through Hole
Maximum temperature of 75°C

TIBPAL20R8-7CNT Applications

There are a lot of Texas Instruments TIBPAL20R8-7CNT PLDs (Programmable Logic Device) applications.

• Battery operated devices
• Power-limited applications
• High-end communication equipment
• Highly complex logic
• Microcomputer systems
• Programmable Logic Devices
• Electrically Devices
• Industrial
• Software
• Various types of power-limited applications