TL1454ACDG4

TL1454ACDG4 Overview

With a 16-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 2. The pmic is packaged in Tube solid enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 3.6V~20V. A -20°C~85°C TA dc switcher is not a problem. With this switching controller, you can switch at 50kHz~2MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. The dcdc regulator features Dead Time Control, Frequency Control for efficient switching control. A DUAL SWITCHING CONTROLLER analog IC is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. The 16 terminations can be used for a wide range of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input of 6V. In addition to "TL1454", there are other relevant dc to dc converter ics you can find. The switching converter has a total of 16 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. Statistically, DC regulator outputs 20V volts. It's important to remember that the dc dc regulator's normaloutput current is 40mA, so you should note it down when starting a new project. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. There is a maximum frequency of 2MHz for this dc regulators. A circuit should contain 20V in order to ensure the voltage regulator dc to dc runs safely and reliably. Since the dc switcher's maximum input voltage is 20V, the voltage must be regulated accordingly. Voltage 3.6V is necessary for the supply. In this case, the dc switcher won't produce more than 40mA watts of output current. The datasheet indicates that the switching converter can output 20V volts at its maximum. nominal current supply for this the controllers dc is 3.5mA.

TL1454ACDG4 Features

Transistor Driver Outputs
Switching Frequency: 50kHz~2MHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION

TL1454ACDG4 Applications

There are a lot of Texas Instruments TL1454ACDG4 DC to DC converter applications.

• Wide-range voltage regulation circuits
• ATMs
• Product testing
• Grinders
• Alternators
• Packaging
• Planers
• Imported equipment
• Product burn-in
• Large fire protection systems