TL494BDR2G

TL494BDR2G Overview

With a 16-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 2. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 7V~40V. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller is capable of switching at the 200kHz position. A generalization of dc dc regulator can be made using Surface Mount. DCDC regulator is controlled efficiently by Dead Time Control, Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a DUAL terminal on the switching converters. A variety of dc switching's functions can be performed on 16 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. You can find other relevant dc to dc converter ics by searching "TL494". There are only 16 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. An input voltage of 7V is the minimum required for the dc dc voltage regulator. The dc to dc regulator can only accept 40V input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 500mA. Voltage regulator dc to dc is designed to operate at 48 % duty cycle during power-ups and power-downs to ensure reliability. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sSwitching controller operates at 40kHz Hz. A circuit should contain 15V in order to ensure the voltage regulator dc to dc runs safely and reliably. The dc to dc voltage regulator is from the SWITCHMODE? series. A current greater than 15mA may result in improper operation and possibly damage to the component.

TL494BDR2G Features

Transistor Driver Outputs
Switching Frequency: 200kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 48 %
Frequency: 40kHz

TL494BDR2G Applications

There are a lot of ON Semiconductor TL494BDR2G DC to DC converter applications.

• Communication system
• Precision electronic equipment
• Large fire protection systems
• Mobile phones
• CMM
• Telecommunications equipment
• Cutting machine tools
• Pipe bending machines
• Computer application technology
• Post equipment