TL5001CDRG4

TL5001CDRG4 Overview

The switching controller fits in the 8-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. It is sufficient to generate 1 outputs with this dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. There are Transistor Driver dc switching's output (s) that it can handle. DC control operates at 3.6V~40V volts and has 3.6V~40V supply voltage. Suitable for work in a -20°C~85°C TA dc switcher. The switching controller is capable of switching at the 20kHz~500kHz position. A generalization of dc dc regulator can be made using Surface Mount. DCDC regulator is controlled efficiently by Dead Time Control, Frequency Control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Thare switching converters has a terminal (s) at DUAL . A variety of dc switching's functions can be performed on 8 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 6V is input. You can find other relevant dc to dc converter ics by searching "TL5001". 8 pins are on switching converter. Statistically, DC regulator outputs 50V volts. It's important to remember that the dc dc regulator's normaloutput current is 20mA, so you should note it down when starting a new project. 500kHz is the maximum frequency of this dc regulators. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 40V. In dormant mode, 1.1mA is used. The maximum input voltage of the dc switcher is 40V, so users need to limit the voltage accordingly. The supply voltage must be 3.6V. A dc switcher can only produce an output current of 3A. Its datasheet indicates the switching converter can output a maximum of 50V volts. Neither the voltage controller's lowest voltage output 1Vr its highest voltage output is less than 1V.

TL5001CDRG4 Features

Transistor Driver Outputs
Switching Frequency: 20kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION

TL5001CDRG4 Applications

There are a lot of Texas Instruments TL5001CDRG4 DC to DC converter applications.

• Automatic plug-in machines
• Flaw detection equipment
• Automatic testing equipment
• Photovoltaic power
• Access control systems
• Remotely powered electric motors
• Solar power plants
• Computer application technology
• Smoke prevention equipment
• Constant current circuits