TL5001IPSR

TL5001IPSR Overview

The switching controller fits in the 8-SOIC (0.209, 5.30mm Width) package and is ideal for most applications. For 1 outputs, the dc motor controller is appropriate. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. The system can process Transistor Driver dc switching's outputs (s). This dc control operates at 3.6V~40V and has a 3.6V~40V supply voltage. Worked in an dc switcher with a -40°C~85°C TA rating. There is a switch at 20kHz~500kHz that can be used with this controller. As it has a Surface Mount value, it can be used for general dc dc regulator. Switching control is made easier with the dcdc regulator's Dead Time Control, Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 8. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 6V. Other relevant dc to dc converter ics can be found by searching "TL5001". 8 pins are on switching converter. A 50V voltage of DC regulator was detected in the test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 20mA. The max frequency of the pmic can reach 500kHz. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 40V. DC switching uses 1.1mA when it is dormant. The maximum input voltage of dc switcher is 40V, so users should limit their voltage accordingly. A voltage of 3.6V is required for the supply. The dc switcher will not provide an output current greater than 3A. As per its datasheet, the switching converter has a maximum output of 50V volts. With a current supply of 1.4mA, it runs. At least 1V voltage is output by the voltage controller.

TL5001IPSR Features

Transistor Driver Outputs
Switching Frequency: 20kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION

TL5001IPSR Applications

There are a lot of Texas Instruments TL5001IPSR DC to DC converter applications.

• Electric water heaters
• Mobile phones
• Various precision measuring instruments
• Special machining machine tools
• Gear/thread machining machines
• Smoke prevention equipment
• Emergency lighting monitoring equipment
• Cutting machine tools
• Power supplies of electronic gadgets
• Automatic plug-in machines