TL5001QDG4

TL5001QDG4 Overview

As a result of 8-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tube solid enclosure protects the pmic. The system can process Transistor Driver dc switching's outputs (s). Voltages 3.6V~40V are the dc control's supply voltage and operating voltage, respectively. Suitable for a -40°C~125°C TJ dc switcher. The switching controller is capable of switching at the 20kHz~500kHz position. dc dc regulator is made easier with Surface Mount. Featured in the dcdc regulator is Dead Time Control, Frequency Control which allows efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. A variety of dc switching's functions can be performed on 8 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 6V. You can find other relevant dc to dc converter ics by searching "TL5001". 8 pins are on switching converter. Based on the test statistics, DC regulator outputs voltage 50V. You should note down the dc dc regulator's usual output current of 20mA when you start a project. Switching controller operates at a frequency of 500kHz. The dc switching utilizes 1.1mA when it is in a dormant state. A nominal working status is achieved when the input voltage is set to 6V. The dc switcher's maximum input voltage is 40V; users must limit it accordingly. Voltage 3.6V must be supplied. In this case, the dc switcher won't produce more than 3A watts of output current. At its maximum, the switching converter can output 50V volts. There is 1.1mA supply current for it. Its lowest voltage output is not less than 1V.

TL5001QDG4 Features

Transistor Driver Outputs
Switching Frequency: 20kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Frequency: 500kHz

TL5001QDG4 Applications

There are a lot of Texas Instruments TL5001QDG4 DC to DC converter applications.

• Flexible manufacturing cells
• Smoke exhaust equipment
• Analog precision reference circuits
• Industrial controllers
• Experimental setup
• ATMs
• Energy management systems
• SMT equipment
• Terrestrial set-top boxes
• Gear/thread machining machines