TL594CDG4

TL594CDG4 Overview

Capsuled in the SOIC package, the switching controller suits most application needs. For 2 outputs, the dc motor controller is appropriate. Using this switching controller, it is possible to switch at 300kHz. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . 16 terminations with various dc switching's functions. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 15V. Total pins of switching converter are 16. Switching converter type is specifically Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 7V. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 45 % during power-up and power-down. A frequency of 300kHz is set for the switching controller. DC regulator should be kept at a temperature of -40°C or higher. A temperature of 85°C more than 85°C degrees Celsius should be maintained in the undc regulator. Switch converter has 1 total function(s). Designing voltage regulators switchings with 16 pins. There is a maximum frequency of 300kHz that can be switched by the controller. A 200mA input switching controller would benefit from it. It outputs a value of 40V in normaloperating procedures. According to its maximum supply voltage rating, the voltage controller is rated 40V.

TL594CDG4 Features

Switching Frequency: 300kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 300kHz

TL594CDG4 Applications

There are a lot of Texas Instruments TL594CDG4 DC to DC converter applications.

• Motor controller circuits
• Gear/thread machining machines
• Printing
• Analog precision reference circuits
• Drilling machines
• Flexible manufacturing cells
• Combined machine tools
• Medical equipment
• Low output voltage switching power supply circuits
• Thermal power