TL712CPW

TL712CPW Overview

For convenience, it is packaged in 8-TSSOP (0.173, 4.40mm Width) .The comparator has an output type of Complementary, Push-Pull, Tri-State, TTL .This package has been designed with Tube .There are 8 terminals on the comparator.The electrical component in this case belongs to the Comparator families.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In terms of type, this is a typical Differential comparator.Electronic comparator has a total of 1 elements.There are 8 pins on this board.Electronic comparator is recommended to mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .There are 8 pins on the comparator.Alternatively, you may search for TL712 to find more pin-to-pin solutions for your specific needs.A quiescent current of 20mA is observed in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 20mA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 20mA .In order to run the device, there are only 5V power supplies required.A normal operation requires a voltage of 5V .

TL712CPW Features

Complementary, Push-Pull, Tri-State, TTL output capability
Differential IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 20mA

TL712CPW Applications

There are a lot of Texas Instruments TL712CPW linear comparators applications.

• Window Comparators
• Simple Analog-to-Digital Converters (ADCs)
• Ultra-Low Power Systems
• Consumer Medical Electronics
• RC Timers
• High-Speed Differential Line Receiver
• Point of load regulators
• Zero-Crossing Detectors
• Multivibrators and High-Voltage Digital Logic Gates
• High-Speed Sampling Circuits