TL712CPWRE4

TL712CPWRE4 Overview

The product is packaged in 8-TSSOP (0.173, 4.40mm Width) in order to facilitate transportation.Output type of this comparator is Complementary, Push-Pull, Tri-State, TTL .The chip is packaged with Tape & Reel (TR) .8 terminals are found on the comparator.Electronic comparator is a component of the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Speaking of types, this is a typical Differential comparator.In total, it contains 1 elements.The pinout of the component starts from 8 pins it has.Electronic comparator is recommended that the mounting type be Surface Mount .Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.This comparator has 8 pins.In case you are looking for more pin-to-pin solutions, you may want to search TL712 .This comparator presents a quiescent current of 20mA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normally, the nominal supply current should be 20mA when using the device.A current supply greater than 20mA may cause the comparator to malfunction.The device can be powered by 5V power supplies.Normal operation requires 5V operating supply voltage.Comparator electronics is acceptable to pack the device by TR .

TL712CPWRE4 Features

Complementary, Push-Pull, Tri-State, TTL output capability
Differential IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 20mA

TL712CPWRE4 Applications

There are a lot of Texas Instruments TL712CPWRE4 linear comparators applications.

• Consumer Medical Electronics
• Lithium ion battery monitoring
• Hand-Held Electronics
• Infotainment and Clusters
• General Purpose Low Voltage Applications
• Power Supervision
• High-Speed Sampling Circuits
• Zero-Crossing Detectors
• Current and voltage sensing
• Multivibrators and High-Voltage Digital Logic Gates