TL7702BCDR

TL7702BCDR Overview

A total of 8 terminals are used to mount this power management. It is packaged with Cut Tape (CT). The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. The package peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 5V. When a supply voltage of 1 is applied to the power ic, it conducts. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 8 pins on the board. There are 8 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 3.6V. Voltage (Vsup) shouldn't exceed 18V volts in this PMIC. The mounting type of the supervisors is Surface MountIt is recommended to set the supervisor's temperature to this range: 0°C~70°C TA. The output voltage of this power managment ic during operation is Complementary. The supply current of the power management is 1.8mA. Among other features, IC power can be also taken advantage of [0], for instance. A similar IC managements number of the manufacturer can always be found by using TL7702, the base power ics number. The maximum supply temperature is 3.5mA.

TL7702BCDR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 3.6V
1.8mA operating supply current

TL7702BCDR Applications

There are a lot of Texas Instruments TL7702BCDR Voltage Supervisors applications.

• Medical-specific isolation transformer
• DC stabilized power supply module
• Low voltage/high power - AI, GPU
• DVR
• Radar
• Military electronics
• Stable power system
• Computer applications
• Battery cars
• Efficient information transmission