TL7712ACDR

TL7712ACDR Overview

There are 8 terminals on this power management that allow it to be mounted. There is a Cut Tape (CT)-packaging method applied to IC management. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. For your reference, this PMIC includes a list of 8-SOIC (0.154, 3.90mm Width) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 5V-voltage supply. IC management conducts in a 1-voltage supply. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 8 pins on IC management. 8 pins make up the power management. Supply voltage (Vsup) should be at least 3.5V for this power management. There should be no more than 18V volts of maximum supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. You should set the supervisor's temperature during 0°C~70°C TA . As a result of this supervisor's operation, the output voltage is Complementary. The supervisor's supply current is specified to 1.8mA. It is always advisable to use TL7712, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 3mA can be used with this power management.

TL7712ACDR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 3.5V
1.8mA operating supply current

TL7712ACDR Applications

There are a lot of Texas Instruments TL7712ACDR Voltage Supervisors applications.

• Battery cars
• Power communication system
• Electrical fire monitoring system
• Telecommunications equipment
• Battery-powered equipment
• Military communications
• Efficient information transmission
• Display equipment
• Solar power charger
• Leakage protection