TLC339IDR

TLC339IDR Overview

The product is packaged in 14-SOIC (0.154, 3.90mm Width) for ease of transportation.This comparator is of the CMOS, Open-Drain output type.This chip is designed with the Cut Tape (CT) package.There are 14 terminals on the comparator.The component belongs to the Comparator family of electrical components.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Speaking of types, this is a typical General Purpose comparator.A total of 14 pins are included.In general, mounting type Surface Mount is recommended.In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .14 pins are available on the comparator.In order to find a solution that meets your specific needs, search TLC339 for more pin-to-pin solutions.There is 125μA current flowing in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal operation of the device requires a nominal supply current of 80μA .An excess of current supply over 20μA could result in malfunction of the comparator.The device can be operated with 5V power supplies.Input current to the device cannot exceed 5pA .The part belongs to the LinCMOS? series of comparator parts.Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.Comparator electronics is acceptable to pack the device by TR .

TLC339IDR Features

CMOS, Open-Drain output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 125μA

TLC339IDR Applications

There are a lot of Texas Instruments TLC339IDR linear comparators applications.

• Wearable Devices
• General Purpose Low Voltage Applications
• Limit Comparators
• High-Speed Differential Line Receiver
• General-Purpose Portable Devices
• Power Supervision
• Industrial
• Automatic Test Equipment
• Battery-Powered Electronics
• Appliances