TLC352IDR

TLC352IDR Overview

Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.A comparator with a CMOS, MOS, Open-Drain, TTL output is used here.This package has been designed with Tape & Reel (TR) .The comparator has 8 terminals.The electrical component in this case belongs to the Comparator families.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator is possible to classify the chip as Differential .This element consists of 2 elements in total.As a result, it contains 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.There are 8 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search TLC352 .This comparator presents a quiescent current of 400μA .There is a Surface Mount on the board for mounting to a PCB or other board.Normally, the nominal supply current should be 300μA when using the device.A current supply greater than 300μA may result in the comparator malfunctioning.The device can be run with 5V power supplies.Electronic comparator is possible to input a maximum of 5pA current into the device.In this case, the part is from the LinCMOS? comparator series.The device is acceptable to pack by TR .

TLC352IDR Features

CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 400μA

TLC352IDR Applications

There are a lot of Texas Instruments TLC352IDR linear comparators applications.

• Zero-Crossing Detectors
• Mobile Communications
• Infotainment & cluster
• General-Purpose Portable Devices
• Battery-Powered Electronics
• High-Speed Differential Line Receiver
• Security Detection Systems
• Analog front end
• RC Timers
• Industrial