TLC354CPWRG4

TLC354CPWRG4 Overview

The product is packaged in 14-TSSOP (0.173, 4.40mm Width) in order to facilitate transportation.A comparator with an output type of CMOS, MOS, Open-Drain, TTL is being used.This device is designed in Tape & Reel (TR) case.Electronic comparator is possible to find the 14 terminals of the comparator.Electronic comparator is a component of the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as Differential .Electronic comparator consists of 4 elements in total.The pinout of the component starts from 14 pins it has.The type of mounting recommended is Surface Mount .Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.There are 14 pins on the comparator.Alternatively, you may search for TLC354 to find more pin-to-pin solutions for your specific needs.There is a quiescent current of 800μA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normal operation of the device requires 600μA supply current.If the current supply exceeds 600μA , the comparator might be damaged.Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.Comparator electronics is part of the LinCMOS? comparator series.The device is packaged in TR and is often used in ADC circuits.

TLC354CPWRG4 Features

CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 800μA

TLC354CPWRG4 Applications

There are a lot of Texas Instruments TLC354CPWRG4 linear comparators applications.

• High-Speed Sampling Circuits
• Battery-Powered Electronics
• High-Speed Differential Line Receiver
• Security Detection Systems
• Battery management and protection
• General-Purpose Portable Devices
• Window Comparators, Multivibrators
• Metering Systems
• Appliances
• Automotive