TLC354IDR

TLC354IDR Overview

The product is packaged in 14-SOIC (0.154, 3.90mm Width) for ease of transportation.There is a CMOS, MOS, Open-Drain, TTL output type for this comparator.The part is shipped by Tape & Reel (TR) .There are14 terminals on the comparator.The component belongs to the Comparator family of electrical components.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Speaking of types, this is a typical Differential comparator.A total of 4 elements can be found in it.The pinout of the component starts from 14 pins it has.The recommended mounting type is Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.This comparator has 14 pins.You can find more pin-to-pin solutions by searching TLC354 .A quiescent current of 800μA is displayed by this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normal use of the device should require a nominal supply current of 150μA .The compartator could be damaged if the current supply exceeds 150μA .In order to run the device, there are only 5V power supplies required.Electronic comparator is possible to input a maximum of 5pA current into the device.The part is from LinCMOS? comparator series.

TLC354IDR Features

CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 800μA

TLC354IDR Applications

There are a lot of Texas Instruments TLC354IDR linear comparators applications.

• Consumer Medical Electronics
• System control and monitoring
• Appliances
• Security Detection Systems
• General-Purpose, Low-Voltage Applications
• Notebooks and PDAs
• Multivibrators and High-Voltage Digital Logic Gates
• General Purpose Low Voltage Applications
• Handheld Instruments
• Mobile Phones