TLC3704IPW

TLC3704IPW Overview

In order to make transportation easier, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .The comparator has an output type of CMOS, Push-Pull, TTL .This chip is designed with the Tube package.As you can see, the comparator has14 terminals.The component belongs to the Comparator family of electrical components.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .When it comes to types, this comparator is a typical General Purpose .In total, it contains 4 elements.There are 14 pins on this board.The type of mounting recommended is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.The comparator consists of 14 pins.You may wish to search TLC3704 for more solutions that address your specific needs.A quiescent current of 125μA is observed in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.The nominal supply current of the device should be 80μA for normal use.A current supply greater than 20μA may result in the comparator malfunctioning.There is sufficient power to run the device from 5V power supplies.A maximum current of 5pA can be supplied to the device.The part is based on LinCMOS? .For normal operation, there should be 5V operating supply voltage applied.

TLC3704IPW Features

CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 125μA

TLC3704IPW Applications

There are a lot of Texas Instruments TLC3704IPW linear comparators applications.

• Security Detection Systems
• Portable and Battery-Powered Systems
• DC/DC and AC/DC power supplies
• High-Speed Differential Line Receiver
• General-Purpose, Low-Voltage Applications
• Battery-Powered Electronics
• Ultra-Low Power Systems
• High-Speed Sampling Circuits
• Portable Battery Monitoring
• Multivibrators and High-Voltage Digital Logic Gates