TLC3704MDG4

TLC3704MDG4 Overview

For convenience, it is packaged in 14-SOIC (0.154, 3.90mm Width) .The comparator has an output type of CMOS, Push-Pull, TTL .This chip is designed with the Tube package.You can find 14 terminals of the comparator.Electronic comparator is a component of the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Electronic comparator is possible to classify the chip as General Purpose .A total of 4 elements can be found in it.The device contains 14 pins.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that the operating temperature be set to -55°C~125°C to prevent malfunctions.There are 14 pins on the comparator.You may wish to search TLC3704 for more solutions that address your specific needs.This comparator presents a quiescent current of 175μA .The PCB or other board can be mounted using the Surface Mount on it.Normal use of the device should require a nominal supply current of 80μA .A current supply greater than 80μA may cause the comparator to malfunction.In order to run the device, there are only 5V power supplies required.The part belongs to the series of comparator LinCMOS? .The operating supply voltage for normal operation should be 5V .This device can be used in general (for example, in ADC circuits). It is packaged in TR .

TLC3704MDG4 Features

CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -55°C~125°C
Quiescent Current: 175μA

TLC3704MDG4 Applications

There are a lot of Texas Instruments TLC3704MDG4 linear comparators applications.

• Limit Comparators
• Pulse, Squarewave, and Time Delay Generators
• Set Top Boxes
• Handheld Instruments
• Current and voltage sensing
• Analog front end
• Zero-Crossing Detectors
• Portable and Battery-Powered Systems
• Hand-Held Electronics
• Point of load regulators